Відео

i’ve been back and forth between the 58a and the 58 and this video is what helped me decide to get the beta version

Thanks mate

Thanks, this really helpsa alot

Plz one video on this

How to connect two digital console two different brand just like dlive s7000 and midas m32

and what about connecting 2 mixers to one audio-interface to compensate for the lack of enough inputs ?

Hey, I'm having trouble recording vocals. My setup is as follows: Mic XLR to Zed, click record, and also click record bus. However, I can't hear my instrumental unless I track it out to the board, which results in a two-track recording with both vocals and the instrumental when I record back into my DAW. My connections are: - Main mix out to the interface - Record out to monitor mixer - Monitor mixer out to interface 1-2 Please help if you can.

If you see this comment, I just wanted to say this is the best explanation video for the MG124. I have an MG166CX-USB myself, but I didn’t know everything until now. Your explanation was super clear. Thank you so much! Sending love from Sri Lanka!

Are all those channels produce good sound?

Thank you, you are a great teacher lad! 😁 I wish you have covered also the groups ...

For the first 14 minutes I thought he was explaining it to me lol 😂

Hi, if I turn off this unit from the back, my guitar signal would it still go to the amp?Thank you, best review.

To my ears, the Beta 58A has its advantages. But is it worth 60% more than the SM58? in most cases, probably not.

Can have fx on aux in MG20XU?

you are the best

Hi, thank you for this great video 17:22 , this is very important point for me, can i connect xlr to ts jack cable to my speaker? I know it wont be balanced connection but will it work fine? Or will i face some issues? Please note that the cable is 1 meter long max.

I was in a jam band 20 years ago. I tried singing into an SM57 but no mater how much pleading I did (TURN IT DOWN!) I could never get my voice's volume up over the rest of the garage band. I did some research and found the Beta 57. The neodymium magnet makes a very big difference. With the purchase of the neodymium (ND) mic the next jam went easier for me. I was getting a much better volume. Ever since I have bought ND or condenser mics.

great video thanks

Very detailed. Thank you for this video. Please the output volume using the USB is low, any suggestion what to do in this situation?

Thank you very much

Can you pls reply to this? My dad saw this video and he says that somewhere u mentioned that pfl should always be pressed even during performance and now he's just not using it the ryt way. Please help me!

The microphone sounds breathy while the pick up sounds throaty, which is better might depend on the composition

how does NL4 speakon cable wired into bridge mode?

Those turbo sound point source speakers still sound great to this day when set up correctly

Excellent presentation. Thank you!

The links provided to your Amazon store do not work.

Thank you so much for creating exactly what I needed in this video! Incredibly helpful and really well done!

Thank you sir, great demo, our church desk definitely needs adjusting.

My teacher good job

So if my bass amps takes a dump and stops working will the PA still get sound or a signal ?

Very clear info! Thank u

on channels 5/6 7/8 9/10 11/12 if you put one drum microphone in Left and one microphone in the right , on say channel 5/6. Will both drum mics be used at the same time? What I want to do is use one channel for two drum microphones. That way I can use one channel for two drums. I have a large kit and need all the jacks in order to have all the drums individually mic'ed. Thank you in advance for your response!

Thank you so much for this one friend. For some strange reason, replacing pads on head monitors always terrorized me lol. This gave me confidence. Regarding the DT line, their ear pads look weird even when new. But the headphones are 100% value for money. Best ear monitors i ever had in that price range. I own the open back DT 990.

Please, I have a question: When we are in the process of adjusting the sound and distributing the monitor for the concert, and we turn off the jazz until the concert starts, is it necessary to go back to adjusting the sound and the monitors again? Thank you very much.

Best easy to understand, comprehensive, good Voice

Thank you so much. Just had a question. I'm trying to run a hybrid event live and online streaming. Where is the best place to put my output for the live streaming? I placed in on headphones output and was just too loud when streaming it online. This is for church.

Sadly I bought a 4-pack of 90 º connectors from amazon with 4-terminals but NONE of the terminals are labeled which sucks because I don't know which to connect the wires !

Thank you for this tutorial! I find the prying part a little scary, but managed to pull through nonetheless. After replacing the ear pad, I noticed a dramatic improvement over the low frequency :)

The first time i used mixer, i was somehow good but not perfect because there were things which was Disturbing me while i was using. But after Learning your Lesson here, am now perfect and good to use it. Thank you so much and Be Blessed

What if i connect my left and right channel to one speaker

Thank you from 2024

Have you done one specifically on the crown xti series? I have a 4002 xti

I have a Powered Mixer capable of powering 2 Passive speakers with 100W RMS at 4 ohms per channel (each of its 2 outputs). What would be the highest rated speakers I should use?

I have two double bass bin and two mid speakers how can I connect to My amplifier that's 5000watteg

Helped me convert my PIG HOG 14 AWG speaker cables to SpeakON on one end and 1/4" mono on the other. Subbed!

Sir at 25:30 the connection to the speaker from amplifier is little bit confused (you've said from amp out to speaker input but you've connected to output of the speaker sir )can you please reply me please

I have several SRM 150 monitors. For a normal lounge, or nightclub situation these are fantastic.

When using 2 condenser microphones that need phantom power they need to be used on channel 1-6 correct? and when using phantom power, if you use 2 condenser mics and 3 other mics, will the regular mics be ruined?

Don't buy this one for any USB applications: it only sends pre-fader via USB, only stereo, so the USB feature is basically useless. Consider that you need a dedicated audio USB interface with this mixer at all times.

at back of the speaker where to insert the cable is it the input or the output?